Connex350™ - Multi-Material 3D Printers

The Connex350™ is a 3D printing system that jets multiple model materials simultaneously. It offers the completely unique ability to print parts and assemblies made of multiple model materials, with different mechanical or physical properties, all in a single build. Taking the revolution even further, the Connex350™ can also fabricate Digital Materials™ on the fly, enabling users to create composite materials that have preset combinations of mechanical properties.

Based on Objet’s breakthrough PolyJet Matrix™ Technology, the Connex350 
3D printer simultaneously prints two FullCure model materials and creates an extensive range of Digital Materials. It can also print a single material from any of the original seven FullCure model materials.

By printing with Digital Materials, the Connex350™ allows you to print parts with specific Shore A values to match the values of the intended production materials. This capability opens up new opportunities, bringing you much closer to realizing the final product at an early stage, including feasibility testing and over-molding process simulation.



Parts produced on the Connex350™ 3D printers have smooth and durable surfaces, with exceptionally fine details and an outstanding surface finish. The high quality output and unique multi-material printing capabilities of the Connex350™ enable you to closely emulate the look, feel and function of an exceptionally wide variety of end products.


Connex350 3D Printer Features & Benefits


​Closer-than-ever simulation of end 3D model products

Simultaneously prints parts with different mechanical properties, opening the way to cutting down on development time and cost, throughout the design cycle.


  • Enables close emulation of the look, feel and function of final products, facilitating selection of the end-product materials
    • Enables printed prototypes that are very close to the end product in terms of mechanical properties and material combinations, e.g. over-molding and double injection
    • Saves days of simulating and preparing complex and expensive molds for double injection
    • Eliminates the need for silicon molds used for testing by enabling most of the testing to be done at an early stage, prototypes printed overnight
  • Saves costs and time on applications that would usually involve gluing separate parts made of different materials or gluing several small pieces to make a large part
  • Improves communication between different groups and decision makers in the company, such as R&D, internal/external customers, engineering, marketing, sales, and management


The Connex350™ 3D Printers allows a wide choice of materials

  • Uses Objet’s FullCure® photopolymer model and support materials, offering a wide variety of mechanical and physical properties, and easy support removal
  • Creates a wide variety of Digital Materials™ -- Composite materials made up of two FullCure model materials integrated in specific concentrations and structures to provide the desired mechanical properties


The Connex350™ 3D Printer offers a variety of build process and printing modes

  • Advanced 3D printing capabilities enabling versatile multi-material printing options:
    • Multi Material Parts – Parts printed using multiple FullCure model materials; eliminates the need to design, print and glue together separate model parts to make a complete model, leading to dramatic savings in printing and post-processing time
    • Digital Materials – Composite materials made up of any two FullCure model materials integrated in specific concentrations and structures to provide the desired mechanical properties; enables close simulation of the target product materials for early-stage testing
    • Mixed Tray – Different parts made with different materials in a single build; saves time on materials replacement and provides an answer for multiple users
  • Easy switching between three printing modes – provides a versatile answer for a virtually unlimited variety of applications:
    • Digital Material (DM) printing mode operates in 30 micron-layers, providing the ability to print parts made of multiple model materials, including Digital Materials
    • High Quality (HQ) printing mode builds single-material parts in 16-micron (0.0006 inch) layers
    • High Speed (HS) printing mode, for single-material parts in 30 micron (0.001 inch)-layers
  • User-defined selection of exact materials, printing speed and resolution needed for individual parts.


The Connex350™ 3D Printer offers outstanding quality, and accuracy
Assures high quality for all your parts, even those with complex geometries.

  • Highest resolution, with identical X & Y resolution of 600 DPI
  • Exceptionally fine details and an outstanding smooth surface finish
  • Horizontal layers of 16µ (0.0006”)
  • Ultra-fine details in all dimensions 
  • Highly precise printing – tolerance of 0.1 to 0.3mm over large models


The Connex350™ 3D Printer offers superior flexibility and time savings

  • Build tray of 350 x 350 x 200mm saves time for all types of parts:
    • Prints large parts in a single build, saving gluing time
    • Prints numerous small parts, made of the same or different materials, together, saving printing time
  • Easy switching between High Quality, High Speed and Digital Material printing modes.
  • Full weekend unattended operation, using Jumbo (4 x 3.6kg) material cartridges (with at least 72 hours of non-stop build capacity)


The Connex350™ 3D Printing System enables Clean office environment

  • UV light curing of each photopolymer layer immediately after jetting
  • Environmentally stable, fully cured models can be handled and used immediately, without post-curing 
  • Materials are supplied in sealed, ready-to-load cartridges, requiring no contact
  • Easy-removal of gel-like support material specially designed to support complicated geometries 
  • Easy machine installation, operation and maintentance
  • No finishing and post-build processing required



Technical Specifications

Tray size (XxYxZ)
350 x 350 x 200mm
(13.8 x 13.8 x 7.9 inches)
Net build size (XxYxZ)
342 x 342 x 200mm 
(13.4 x 13.4 x 7.9 inches)
Layer thickness (Z-axis)
Horizontal build layers down to 16-micron
Build Resolution
X-axis:  600 dpi :42 µ
Y-axis:  600 dpi :42 µ
Z-axis: 1600 dpi :16 µ

Printing Modes

  • Digital Material (DM)
    30-micron (0.001 inch)
  • High Quality (HQ)
    16-micron (0.0006 inch)
  • High Speed (HS)
    30-micron (0.001 inch)
0.1-0.3mm (0.004-0.01 inch) typical (accuracy varies according to geometry, part orientation and print size)
Modeling Material 
• FullCure720 Model transparent
• VeroWhite Opaque material
• VeroBlue Opaque material
• VeroGray Opaque material
• VeroBlack Opaque material
• DurusWhite Polypropylene-like material
• TangoGray, rubber-like flexible material
• TangoBlack, rubber-like flexible material
• TangoPlus, rubber-like flexible material - High Speed DM mode 
• TangoBlackPlus, rubber-like flexible material - High Speed DM mode 
Digital Materials
Wide range of composite materials fabricated on the fly 
Support Material
•FullCure705 Support
•Non-toxic gel-like photopolymer •support easily removed by  WaterJet
Materials Cartridges
• 4 sealed 3.6 kg (7.9 lb.) cartridges
• Two different model materials loaded 
• Front loading for quick replacement
• Tango family and DurusWhite also available as 1.44kg (3.17lb) net weight in 3.6 kg casing.
Power Requirements
110 – 240 VAC 50/60 Hz
1.5 KW single phase
Machine Dimensions (WxDxH)
1420mm x 1120mm x 1130mm
(55.9 x 44.1 x 44.5 inch)
Machine weight
Net 500kg. 
Gross (in crate) 580kg (Net 1102lb. Gross (in crate) 1279lb.

Software Objet Studio™ for Connex350 features:

• Easy selection of materials including Digital Materials
• Part separation into subassemblies
• Suggested build orientation and speed, Auto-place
• Automatic real time support structure generation
• Slicing on the fly
• Network Version

Input Format
STL, SLC and objDF File
Operational Environment
Temperature 18°C to 22°C 
(64.5°F to 71.5°F)
Relative Humidity 30-70%
CADMatrix™ Add-in
CADMatrix add-in enables designers and engineers to seamlessly assign Objet model materials to multi-part, multi-material designs within CAD software*, thus allowing for increased control of 3D model validation.

* CAD software: CADMatrix ™ is compatible with the following: Pro/ENGINEER® SolidWorks, AutoDesk Inventor

Special Facility Requirements 
– None
Print heads
8 units
Network Communication
Windows XP, Windows Vista




Solutions Products Media Popular Links

3D Printing
Polyjet Matrix Technology
Additive Manufacturing
Rapid Prototyping

Desktop 3D Printers
Professional 3D Printers
Multi-Material 3D Printers
Eden Family
Connex Family


3D Printing Materials
Used Equipment
3D Printer Comparison


Social Media


Request Quote
About Us
Contact Us


3D Printers Canada is the Canadian Distributor of 3D Printing and Rapid Prototyping systems and equipment. Our team of certified engineers offer Rapid Prototyping solutions which enables 3D Printers Canada to always be strategic and innovative to better your Product Development experience. With the leading edge technology for all Product design, Product development and Device development applications, we are competitively priced and always deliver quality 3D Printer products to our clients. Our Canadian customers faith in our technical product development experience and professional engineering solutions and services proves that 3D Printers Canada is your trustworthy business partner for your Product Development needs. Our goals and passions are bringing your ideas and concepts to market. 3D Printers Canada support clients in the following areas : Vancouver BC, British Columbia, Surrey, Burnaby, Richmond BC, Langley, Abbotsford, Coquitlam, North Vancouver, Quebec City, Canada, Sherbrooke, Canada, Alberta, Calgary, Manitoba, Montreal Quebec, Trois-rivieres, Saskatchewan, Toronto Ontario, Vaughan Ontario, Markham Ontario, Thornhill Ontario, Richmond Hill Ontario, Concord Ontario ,Mississauga , Durham Region, Oshawa, Etobicoke, Cambridge, Brampton, Whitby, Peel, Woodbridge, Barrie, York region, Maple, Aurora, Newmarket and surrounding areas in Ontario. We continously concentrate on servicing the businesses cities of Toronto, Vaughan, Markham, Thornhill, Richmond Hill, Mississauga, Durham Region, Oshawa, Etobicoke, Brampton, Brockville, Belleville, Peterborough, Kingston, Cambridge, Markham, Pickering, London, Brantford, Hamilton, Oakville, Windsor, Whitby, Peel, Woodbridge, Barrie, York, Maple, Aurora, Newmarket Ontario and surrounding areas. Vancouver , Calgary , Edmonton, Alberta, Montreal Quebec and Ottawa Canada. © 2011 Objet, Objet24, Objet30, Objet Studio, Quadra, QuadraTempo, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, CADMatrix, Connex, Connex260, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack, TangoGray, TangoPlus, TangoBlackPlus, VeroBlue, VeroBlack, VeroClear, VeroDent, VeroGray, VeroWhite, VeroWhitePlus, Durus, Digital Materials, PolyJet, PolyJet Matrix, ABS-like and ObjetGreen are trademarks or registered trademarks of Objet Geometries Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners.



Home Facebook Twitter YouTube Partners Contact